Uthini umahluko phakathi kwesiqu kunye ne-tailstock?

1.Impahla yebhokisi yomsila:

I-Trunk yePlastiki: Izinto eziqhelekileyo ziquka i-PP (i-polypropylene) kunye ne-ABS (i-acrylonitrile butadiene styrene). Ibhokisi lomsila elenziwe ngezinto zePP linamandla amakhulu kunye nokuchasana kwempembelelo, ilula kwaye ibiza imali, kwaye ifanelekile ukusetyenziswa kwansuku zonke. Izinto ze-ABS zisebenza ngcono ngokokuqina kunye nokunganyangeki, kunye nokukhazimla okuphezulu, kodwa kubiza kakhulu. Iingenelo zesiqu seplastiki kukuxhathisa impembelelo, ukuxhathisa kwi-deformation, inkangeleko eguquguqukayo, uyilo olulungelelanisiweyo olunokunciphisa ukuxhathisa umoya, kodwa umphezulu udla ngokuguga.

I-aluminium alloy trunk: Le nto ye-trunk yomelele kwaye yomelele, inokumelana nempembelelo enamandla, ukusebenza kakuhle kokungena kwamanzi, kunye nembonakalo ephezulu. I-aluminium alloy trunk ifanelekile ukuhamba ngebhayisikili okanye iimeko apho izinto ezinzima zifuna ukuqhutyelwa, kodwa ixabiso lidla ngokuba phezulu kwaye ubunzima bunzima [^ 129 ^] [^ 135 ^].

2.Impahla yephakheji yomsila:

Iingxowa zomsila zenziwe ngokubanzi ngezinto ezifana nelaphu lenayiloni, iplastiki yogwebu ye-EVA, isikhumba sePU, njl. Ilaphu lenayiloni yeyona nto ixhaphakileyo, enexabiso eliphantsi kodwa alinamanzi angangeni. Iplastiki yogwebu ye-EVA isetyenziselwa iingxowa zomsila weqokobhe olukhuni, ibonelela ngembonakalo engcono kunye nokuqina. Isikhumba se-PU sineempawu ezintle zokungena manzi kwaye zifanelekile kwiimeko ezifuna ukuqina kunye nokungangeni kwamanzi.

Ezinye iingxowa eziphezulu zomsila zingasebenzisa izinto ezifana nelaphu le-wax, elinomgangatho ongcono wokungangeni kwamanzi kunye nempahla yokunxiba.

Isishwankathelo, i-trunk ngokuqhelekileyo yenziwe ngeplastiki okanye i-aluminium alloy material, igxininisa ukuqina kunye nokuqina, ngelixa isikhwama somsila sihlala senziwe ngendwangu elula, igxininisa ukuguquguquka kunye nokuphatheka. Ukhetho lunokwenziwa ngokusekelwe kwiimfuno zomntu ngamnye kunye neemeko zokusetyenziswa.